The Epson SureColor F570 is a professional-grade industrial dye-sublimation printer designed for high-volume production of custom apparel, soft signage, and promotional products. With its advanced PrecisionCore TFP printhead and high-density pigment inks, it delivers vibrant, durable prints on polyester fabrics and coated substrates.
Key Features of Epson SureColor F570:
- PrecisionCore TFP Printhead: Micro-piezo technology for precise ink droplet placement
- UltraChrome DS Ink: High-density pigment ink formulated for sublimation
- Industrial Durability: Built for 24/7 production environments
- Large Printing Area: Up to 24" (610 mm) wide printing
- High-Speed Printing: Up to 215 ft²/hr (20 m²/hr) in production mode
- Roll-to-Roll System: Continuous printing with automatic take-up reel
Understanding Your Epson F570 Printer Components
Before setup, familiarize yourself with these key components of your Epson SureColor F570:
Epson SureColor F570 Printer Diagram
Control panel, ink system, print head, media handling system, maintenance station
- Print Head: PrecisionCore TFP technology with 8 channels (CMYK x 2)
- Ink System: 700ml bulk ink system with individual cartridge slots
- Media Handling: Roll-to-roll system with automatic take-up reel
- Control Panel: Color LCD touchscreen for printer operation
- Maintenance Station: For print head cleaning and capping
- Heater Unit: Optional heater for improved ink drying
Unboxing and Initial Printer Setup
Proper initial setup is crucial for optimal print quality and printer longevity. Follow these detailed steps for your Epson F570:
Step 1: Unpack Your Epson F570 Printer
- Remove all tape and packaging materials (check for hidden tapes)
- Take out the power cord, ink bottles, and documentation
- Remove all transit locks and protective materials
- Keep the box and packaging for possible future service needs
- Place printer on a stable, level surface with adequate clearance (minimum 4" on all sides)
Step 2: Install UltraChrome DS Ink System
- Power on the printer and wait for it to initialize
- Open the ink compartment door
- Install ink bottles in their correct positions (C, M, Y, K)
- Prime the ink system following on-screen instructions
- Allow the printer to charge the ink system (may take 20-30 minutes)
- Perform initial ink system check
Important: Never turn off the printer during initial setup as this may cause ink system issues. Always use genuine Epson UltraChrome DS ink to prevent print head clogging and to maintain warranty. The F570 uses dual channels for each color (C, M, Y, K) to ensure continuous printing.
Step 3: Perform Initial Printer Calibration
- Load a roll of sublimation transfer paper
- From the touchscreen, navigate to Maintenance > Calibration
- Follow on-screen instructions to print and scan calibration patterns
- Perform print head alignment
- Run nozzle check pattern to verify all channels are working
- Perform initial cleaning cycle if any nozzles are missing
Connecting Your Epson F570 Printer
The Epson SureColor F570 offers multiple connection options for production environments:
| Connection Type |
Best For |
Setup Complexity |
Speed |
| USB |
Single computer, most reliable |
Easy |
Fast |
| Ethernet |
Production environments, multiple users |
Moderate |
Very Fast |
| Wi-Fi |
Flexible placement |
Moderate |
Good |
Detailed Network Setup for Epson F570
Method 1: Ethernet Connection
- Connect Ethernet cable from printer to your network
- On the printer's touchscreen, tap Settings (gear icon)
- Select Network Settings > Wired LAN
- Choose DHCP or enter static IP information
- Print a network configuration page to verify settings
- Install printer driver on your RIP computer
Production Tip: For most industrial environments, we recommend a wired Ethernet connection for the most reliable, high-speed data transfer. This prevents print interruptions during large or complex print jobs.
Driver and RIP Software Installation
For industrial sublimation printing, you'll need both the printer driver and RIP (Raster Image Processor) software:
Windows Installation (Detailed Steps)
- Install your preferred RIP software (Epson Edge Print, Wasatch, etc.)
- Visit Epson's professional driver download page
- Search for "SureColor F570" and select your exact model
- Download the complete software package
- Run the installer as Administrator
- Choose "Network Connection" or "USB Connection" as appropriate
- Complete the installation wizard
- Configure RIP software to recognize your F570
- Print a test file to verify setup
RIP Software Configuration
Basic RIP Setup for Sublimation Printing
- Launch your RIP software
- Create new printer profile for F570
- Set correct media size (up to 24" width)
- Configure color management settings
- Set up mirror image printing for sublimation transfers
- Save custom presets for different media types
- Calibrate for your specific heat press settings
Important: The Epson F570 requires RIP software for professional results. While it can work with standard drivers, for production environments a professional RIP is essential for color accuracy and workflow efficiency.
Advanced Sublimation Configuration
Maximize your Epson F570's capabilities with these professional sublimation settings:
Ink System Management
- Access the Ink System menu from the touchscreen
- Configure ink usage tracking
- Enable ink low warnings
- Check ink expiration dates
- Monitor ink system health status
- Set up automatic ink replenishment alerts
Custom Print Modes
Configure these settings in your RIP software for different applications:
- Color Modes: Vivid, Natural, Custom ICC profiles
- Print Quality: Draft, Standard, High, Production modes
- Media Types: Presets for different transfer papers
- Ink Density: Adjust for optimal sublimation transfer
- Heater Settings: Configure if using optional heater unit
Sublimation Pro Tip: Create separate profiles for different polyester fabric types and transfer papers. The optimal ink density and color profile varies significantly between materials.
Epson F570 Troubleshooting
Resolve common Epson F570 sublimation printing issues with these solutions:
Print Quality Problems
Banding or Streaking Issues
- Run nozzle check pattern
- Perform cleaning cycle (Level 1 first, then Level 2 if needed)
- Check ink levels and prime if necessary
- Verify media type settings match your paper
- Check print head height adjustment
- For persistent issues, perform manual head cleaning
Media Feeding Issues
Paper Not Feeding Properly
- Check media roll is loaded correctly
- Clean paper feed rollers
- Adjust media tension settings
- Ensure media guides are properly positioned
- Check for proper media type selection
Warning: Excessive cleaning cycles waste expensive ink. If print quality issues persist after 2-3 cleanings, contact Epson Professional Imaging Support. Never use third-party inks as they will void your warranty and may damage the printhead.
Error Codes
Common Epson F570 error codes and solutions:
- 00010005: Ink system error - check ink lines for bubbles
- 0001001C: Carriage error - check for obstructions
- 00020001: Maintenance tank near full - prepare replacement
- 00040002: Media jam - clear any obstructions
Epson F570 Maintenance
Proper maintenance is critical for consistent sublimation print quality and printer longevity:
Daily Maintenance Routine
- Run nozzle check pattern
- Clean printhead wiper and capping station
- Check ink levels
- Clean platen and surrounding area
- Inspect media path for debris
- Print test swatch to verify color accuracy
Weekly Deep Maintenance
- Perform thorough printhead cleaning
- Check and clean encoder strip
- Inspect ink lines for bubbles or obstructions
- Clean inside of printer (dust with soft brush)
- Lubricate moving parts as specified in manual
- Verify all firmware and software is up to date
Sublimation Pro Tip: Keep a maintenance log to track cleaning cycles, ink changes, and any issues. This helps identify patterns and prevents problems before they affect production.
Conclusion and Professional Recommendations
By following this comprehensive guide, you've learned professional techniques for setting up, configuring, and maintaining your Epson SureColor F570 sublimation printer. Remember these key points for optimal performance:
- Always use genuine Epson UltraChrome DS ink for best results and warranty compliance
- Register your product for extended support and warranty benefits
- Maintain a consistent environment (temperature and humidity control)
- Follow strict maintenance schedule for industrial operation
- Use high-quality sublimation transfer papers for best results
- Invest in quality RIP software and color management tools
- For production environments, consider Epson's CarePack service plans
With proper setup and care, your Epson SureColor F570 should deliver years of reliable service and stunning print quality. For professional support, always consult Epson's Professional Imaging division or authorized service providers.